Re: _[Uludag]_ALCATEL_SpeedTouch_USB_ADSL_Modem_nasıl?

[Bülent Potur]

Sevgili Hocam,
Paketler güncellense de speedtouch cephesinde değişen bir şey yok.
Saygılarımla.
Bülent Potur

İşte yeni versiyondan ( 1.3.1-1) sonraki  speedtouch-start  komutundan sonra
tamamı konsole kabuk ara belleğine sığmayan, baş ve son kısmından alınmış
mesajlar:


http://www.roaringpenguin.com
pppoa3: no process killed
disconnect script failed
pppoe: option requires an argument -- I
Usage: pppoe [options]
Options:
   -I if_name     -- Specify interface (default eth0.)
   -T timeout     -- Specify inactivity timeout in seconds.
   -t timeout     -- Initial timeout for discovery packets in seconds
   -D filename    -- Log debugging information in filename.
   -V             -- Print version and exit.
   -A             -- Print access concentrator names and exit.
   -S name        -- Set desired service name.
   -C name        -- Set desired access concentrator name.
   -U             -- Use Host-Unique to allow multiple PPPoE sessions.
   -s             -- Use synchronous PPP encapsulation.
   -m MSS         -- Clamp incoming and outgoing MSS options.
   -p pidfile     -- Write process-ID to pidfile.
   -e sess:mac    -- Skip discovery phase; use existing session.
   -n             -- Do not open discovery socket.
   -k             -- Kill a session with PADT (requires -e)
   -d             -- Perform discovery, print session info and exit.
   -f disc:sess   -- Set Ethernet frame types (hex).
   -h             -- Print usage information.

PPPoE Version 3.6, Copyright (C) 2001-2005 Roaring Penguin Software Inc.
PPPoE comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it under the
terms
of the GNU General Public License, version 2 or any later version.
http://www.roaringpenguin.com
Couldn't get channel number: Input/output error
pppoa3: no process killed
disconnect script failed
pppoe: option requires an argument -- I
Usage: pppoe [options]
Options:




Üst tarafı devamlı tekrarlıyor
Bu da finalesi:

cript pppoe -s -I `"/usr/sbin/pppoa3" -vpi 8 -vci 35 -b` finished (pid
27099), status = 0x0
Script pppoe -s -I `"/usr/sbin/pppoa3" -vpi 8 -vci 35 -b` finished (pid
27103), status = 0x0
Script pppoe -s -I `"/usr/sbin/pppoa3" -vpi 8 -vci 35 -b` finished (pid
27107), status = 0x0
Script pppoe -s -I `"/usr/sbin/pppoa3" -vpi 8 -vci 35 -b` finished (pid
27113), status = 0x0
Script pppoe -s -I `"/usr/sbin/pppoa3" -vpi 8 -vci 35 -b` finished (pid
27117), status = 0x0

..........

Script pppoe -s -I `"/usr/sbin/pppoa3" -vpi 8 -vci 35 -b` finished (pid
28053), status = 0x0
Script pppoe -s -I `"/usr/sbin/pppoa3" -vpi 8 -vci 35 -b` finished (pid
28059), status = 0x0
Script pppoe -s -I `"/usr/sbin/pppoa3" -vpi 8 -vci 35 -b` finished (pid
28063), status = 0x0
Script pppoe -s -I `"/usr/sbin/pppoa3" -vpi 8 -vci 35 -b` finished (pid
28067), status = 0x0
pppoe: option requires an argument -- I
Usage: pppoe [options]
Options:
   -I if_name     -- Specify interface (default eth0.)
   -T timeout     -- Specify inactivity timeout in seconds.
   -t timeout     -- Initial timeout for discovery packets in seconds
   -D filename    -- Log debugging information in filename.
   -V             -- Print version and exit.
   -A             -- Print access concentrator names and exit.
   -S name        -- Set desired service name.
   -C name        -- Set desired access concentrator name.
   -U             -- Use Host-Unique to allow multiple PPPoE sessions.
   -s             -- Use synchronous PPP encapsulation.
   -m MSS         -- Clamp incoming and outgoing MSS options.
   -p pidfile     -- Write process-ID to pidfile.
   -e sess:mac    -- Skip discovery phase; use existing session.
   -n             -- Do not open discovery socket.
   -k             -- Kill a session with PADT (requires -e)
   -d             -- Perform discovery, print session info and exit.
   -f disc:sess   -- Set Ethernet frame types (hex).
   -h             -- Print usage information.

PPPoE Version 3.6, Copyright (C) 2001-2005 Roaring Penguin Software Inc.
PPPoE comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it under the
terms
of the GNU General Public License, version 2 or any later version.
http://www.roaringpenguin.com
Script pppoe -s -I `"/usr/sbin/pppoa3" -vpi 8 -vci 35 -b` finished (pid
28073), status = 0x0
pardus bpotur #

Netice yok.





2006/1/6, erdinc at erdinc.info <erdinc at erdinc.info>:
>
> Merhaba, paketi güncelledim..
>
> http://www.erdinc.info/pardus/speedtouch-1.3.1-1.pisi
>
> On January 5, 6:48 pm emre kavur <emrekavur at gmail.com> wrote:
>
> > Aynı sorun bende de oldu.Verilen hatalar tıpa tıp aynı.Bende tüm
> > ayarları yaptım, kurulum sorunsuzdu, kullanıcı adı(kullanıcıadı@ttnet
> > şeklinde), şifre vs girdim ama aynı hatayı aldım.Umarım en kısa
> > zamanda
> > sorun çözülür, bizde çu pencereleri bi daha açmamak üzere kapatırız
>
>
>
> _______________________________________________
> Uludag mailing list
> Uludag at uludag.org.tr
> http://liste.uludag.org.tr/mailman/listinfo/uludag
>
>
>
-------------- sonraki bölüm --------------
Bir HTML eklentisi temizlendi...
URL: http://liste.uludag.org.tr/uludag/attachments/20060106/47944362/attachment-0001.htm